Lifting Equipment

315 |

Flat Grab

Flat Grab FGS with Adjustable Suspension Ring for the Safe Handling of Concrete Parts.

The Flat Grab FGS was developed for handling rough stones and concrete parts with parallel surfaces.

The high clamping force guarantees safe handling. One clamping jaw is adjustable. The narrow construction of the second clamping jaw is welded to one end of the beam. This narrow construction enables the grasping, tensioning and the safe upright setting of horizontally positioned concrete parts. Due to the adjustable suspension ring, e.g. L-shaped stones can be put into an upright position.

The FGS is equipped with exchangeable rubber coatings.

The FGS can be used near to the ground together with any lifting equipment.

For picking up the load, a bolt is pulled which snaps in by itself when the load is put down and the grab opens automatically.

Due to a high-strength chain the FGS has a low net weight. The guide handle enables an exact positioning of the load. The grab is coloured orange, RAL 2000. The beam and the connecting elements are galvanized. The application has been made for patent.

Flat Grab FG / FGB for the Safe Handling of Wide Loads.

The Flat Grab FG was developed for the handling of rough stones and concrete parts with parallel surfaces. High clamping force guarantees safe handling. The complete clamping range of both clamping jaws is adjustable.

Due to the adjustable suspension ring, parts with an eccentric center of gravity can also be held in a horizontal position. The FG is equipped with exchangeable rubber coatings.

The Flat Grab FG can be used near to the ground with any lifting equipment.

For picking up the load, a bolt is pulled which snaps in by itself when the load is put down and the grab opens automatically.

Due to a high-strength chain the FG has a low net weight.

The model FGB has wide clamping jaws and is used for handling delicate parts.

The grab is coloured orange, RAL 2000. The beam and the connecting elements are galvanized.

Plate Grab for the Safe Handling of Horizontally Positioned Plates

The Plate Grab PG was developed for handling rough plates with parallel surfaces.

The high lever transmission guarantees high clamping force. By turning the clamping jaws, parts can also be gripped from the inside.

The PG is equipped with exchangeable rubber coatings.

The equipment is orange in colour, RAL 2000.

  • Safe transport of concrete parts via high clamping force
  • Adjustable suspension ring for balancing the center of gravity

More equipment from this range : Lifting Equipment

You didn’t find exactly what you were looking for? Please turn to our page of special constructions or contact us directly.